The Torus

This task looks difficult at first however I found it to be pretty easy. I first start by putting the aluminium piece into the roller to get the general curve before hammering it. With the aid of a few peers, i was able to get the general shape easily by hammering the metal piece inwards and making sure i get rid of big bumps while my peers are holding the metal piece down to the stump as i found that clamping it doesn't work well. I then proceed to form the outer curves on a metal dolly using a planishing hammer before using the English wheel to smoothen everything out. I then proceed on sanding one side and polishing it. Overall I found this task to be challenging but not too difficult.











Comments

Post a Comment

Popular posts from this blog

The Reflection

Image
As an Industrial Design student, model making is model making is no stranger to me, however, I've only touched metal once throughout my studies and it was just a simple cutting and bending of a 0.5 mm aluminium. The rest of the times, we usually made models from blue foams, 3D printing, and wood works, which is why metal working in this class felt like a whole new world. Throughout this class, I have learned new things and skills on metal shaping, which will be helpful in future model making especially where metal is involved and metal is quite common in product design.  For this critical review task, I chose to review the tray, as it is the one i found most difficult, and took me the most tries to nail it. The Tray The tray was the most difficult task for me, even more than the tank in my opinion. There's so much room for errors with the tray compared to the tank.   The tray took a total of 3 tries before i got a decent one.  1st Attempt ...
Read more

The Fuel Tank - Phase 4: The Banging

Image
Phase 4: Forming the Tank With the template done, the next thing we did was dividing the model into three parts with similar size and difficulty. This took a while but we ended up with this division   As no one wants to do part 1 as it is the biggest and relatively the most difficult, we decided to do a raffle. In the end i ended up with Part 1 along with Jin and Zoey Part 1: Me , Jin , Zoey Part 2: Zeran, Tauqir, Ben Part 3: Lornia, Kelvin, Natalia With the parts assigned we then proceed on deciding how to apply the pattern to the metal sheet. Our part 1 group; Jin, zoey, and Me decided to do the blister for the overall shape before free forming it using techniques we learned from the previous assignment. The Blister To make the blister, we decided to measure where our parts are going to meet on the model and laser cut that slice and trace it onto a piece of wood then using the jigsa...
Read more